9/19/2023 0 Comments Use handshaker app through usbI ask if you have tried other inputs to be sure that the dac is working properly. So this is strange and wonder what bluesound has to say. Since your dac was produced in July, it has the Gen2.0 module which should work with that streamer but we have never had any comments about it not working. Have you tried other inputs on the dac other than USB to see if it works? I tried unplugging the optical connection to see if having two simultaneous connections may be causing the problem but no change. When switching back to USB input, same lack of audio. When I change the source on the DAC to optical, everything works like it did before. I did try to increase/decrease the volume manually in the app but again, nothing changes. It also appears that via USB you can't select Fixed Volume. I tried selecting "Default" vs the Holo Audio DAC description but no change. The BlueOS app (android) recognizes the Holo Audio DAC as it displays it in the audio settings. It's almost like the audio signal is being sent to the DAC but with zero volume.Īdditional Info: Audio works via optical out. The DAC recognizes the signal as it displays the proper sampling rate (including changing with audio track changes), but there is no audio. Leave us a comment if this guide helped you or if you a question.Hardware: I have a Node N130, firmware 3.16.3. Next you will be able to view and transfer your phone files as shown belowĪfter using the app for a few times you will come to know that it is very convenient and user friendly, you will of course not be required to repeat the above steps each time you connect your phone to your Mac computer. Step 8- That’s it, you have successfully configured Handshaker on your phone and Mac. Inside "Developer Options" there will be an option to enable "USB Debugging". Now go back to the main settings screen and scroll down till you see "Developer Options". To turn it on go to "Settings" of your phone, then "About Phone", then scroll down till you see "Build number", tap on this "build number" field 7 to 8 times untill a message appears saying that you are a developer. Note: If after performing the above step nothing happens, then it might be that USB debugging is off on your device. If you want you can tap OK or cancel to skip for now. Step 7-When you plug in your phone again to your Mac computer, a prompt will appear on your phone asking you if you would like to set Handshaker as the default action. Step 6- Once the app has been installed, you will need to unplug and re-plug the USB cable. Step 5- Navigate to the downloaded APK and install it on your phone. Step 4- Once you tap on view, your default browser will open up prompting you to download HandShaker-official.apk. Once you do that, a prompt will pop up on your Android phone as shown below. Step 3- Simply connect your Android Phone or Tablet using the required USB cable to your Mac computer. Step 2- The following screen will pop upon installation. Step 1- To start off, you will need to download the Handshaker app for your Mac from here. Guide: Download HandShaker 2.5.6 and Install on your MacOS This provides much better security, stability, and improved transfer speeds.įollow the step by step guide to get the handshaker app on your phone and Mac computer. As previously mentioned, Android file transfer is outdated and in need of further improvements. Smartisan has designed and developed a new sync transfer protocol to solve a lot of the problems with existing Android sync transfer protocols. Handshaker was originally developed by Smartisan for their Android devices but fortunately, the app works for all Android phones and tablets.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |